After holding the TPMS reset button for three seconds, release it. Wait about 20 minutes for the sensor to re-calibrate before driving. Under the steering wheel, you will find the reset button for the tire pressure monitor.
Where is my TPMS reset button?
The TPMS reset button is usually located beneath the steering wheel in most vehicles. The TPMS must be electronically reset after you change your vehicle’s tires in order to clear the error code. Simply hold down the TPMS reset button for three blinks, then release it to reset the tires’ pressure sensors.
How do you manually reset TPMS?
Turn the ignition switch to the “on” position, but do not start the car while the vehicle is off. It’s time to release the TPMS reset button and wait for the Toyota tire pressure sensor to flash three times. Wait 20 minutes for the sensor to re-calibrate before driving. In most cases, the TPMS reset button is located beneath the steering wheel.
How do I resync my tire pressure sensor?
Turn the ignition switch to the “On” position, but don’t start the vehicle at this point in time. Once you locate the TPMS reset button (check your manual if you need help), hold it down until the tire pressure light blinks three times, then let go. To reset the tire pressure light, start the car and wait 20 minutes.
Why won’t my tire pressure light go off even if the tires are full?
After inflating your tires to the proper pressure, check the TPMS light. Ten minutes of driving at 50 mph. The TPMS light should go out the next time you start the car after performing this procedure to clear the tire sensors.
Where is TPMS sensor located?
In the United States, the direct TPMS is more commonly used. Antenna-like sensors are either built into the tire pressure valve or attached to the wheel rim using band clamps. The on-board computer receives the data from these devices.
Is it safe to drive with TPMS light on?
It’s dangerous to drive with your TPMS light on. It’s impossible to tell how quickly air is escaping from your tire, or how long it has been over or underinflated, without an inspection. To ensure that all four tires are properly inflated, use a tire pressure gauge.