Blinking White: eero software is starting up/connecting to the Internet. As soon as the eero app connects to an eero, it begins broadcasting Bluetooth® Solid Blue. Indicator in blinking green: Multiple eeros detected during setup.
Why is the light on my eero white?
The eero’s white LED indicates that it is ready for use, and the app’s green status confirms this. eero is in the process of configuring or setting up when the eeros on the eero app are outlined in yellow, but the eero LED is white.
Why is my eero not connecting?
Remove the power cable from the back of your eero, wait 30 seconds, and then replug it in to see if that helps. This can sometimes resolve connectivity problems. Flashes of white will appear on the eero’s LED during startup.
How do I reset my eero router?
Resetting your eero is as simple as holding down the reset button for 15 seconds, then releasing it. The eero LED light will flash blue after a successful hard reset, indicating that the eero is ready for re-configuration.
How long does it take for eero to connect to Internet?
This can take anywhere from 3 to 5 minutes, depending on the modem. It is no longer necessary to use your old router after you plug in your eero. In order to get the most out of your network, consider using a modem/router combo in bridge mode.
Why does my eero say offline?
“Offline” is a signal that the gateway eero connected to the modem can’t connect to the network. The user should double-check that their eero is powered on and connected to the modem in this scenario.
How do I get blinking eero to blink blue?
eero can be hard reset by holding the reset button for 15 seconds, then releasing it. The eero LED light will flash blue after a successful hard reset, indicating that the eero is now ready for setup again.
How long does eero restart take?
Wait for your eero to restart after plugging it back in. This should only take a few minutes of your time.
How do I force a device to connect to eero?
You can quickly assign a device to a profile using the Device details page. You can assign (or reassign) a device to a specific profile by accessing this section. Five bars represent the connection strength of your device to the eero network.
Should eero be hot?
When eeros are turned on and operating, they should get warm like any other electronic device. Running eero may feel like touching the bottom of a laptop that has been sitting on your lap and in use for a long time.
What is the button on the bottom of the eero?
To perform a hard reset, press and hold the reset button for about 15 seconds until the LED turns red. When the Eero system is reset, the LED light on each unit will begin blinking blue, indicating that the reset has been successful.