Use the large button in the center of the service map to unlock a Bird scooter. QR codes can be easily scanned by opening your phone’s camera and scanning the QR code on top of the vehicle. In addition to the QR code, you can enter the alpha-numeric code that appears just below it.
Can you steal a Bird scooter?
A stolen electric scooter appears to be almost too easy to obtain. You can simply lift them and throw them in your car because they’re only 30 pounds and aren’t attached to anything. The alarm should not go off if you don’t attempt to ride one while it is locked.
How do you open a Bird scooter?
To begin your first ride, simply unplug your Bird One from the wall and open the app. Slide the left arrow to the right of the screen in the Slide to ride section of My Bird. To unlock the wheels, scan your Bird’s QR code. It will chirp if you try to move your Bird while it is locked.
Where is the lock on a bird scooter?
To put a halt to an active ride, park the car where it belongs and turn on the Lock toggle in the app’s upper right corner. The vehicle will be reserved for up to 75 minutes, during which time you will be charged at the per-minute rate.
How do you unlock a padlock?
The majority of key locks can be unlocked by turning the key counterclockwise, but this may not always be the case. If turning your key clockwise doesn’t open the door, try turning it back and forth. After unlocking the lock, the shackle will disengage from the lock.
How do you unblock an electric scooter?
Some e-scooters can be unlocked by simply swiping right in the companion app. Remove the handlebars, disconnect the cable inside for 3-4 hours, then reconnect it if that doesn’t work. The electric scooter should then unlock itself.
Where is the QR code on my scooter?
To unlock the scooter, use the Superpedestrian app to scan the QR code on the handlebars. Enter the QR code manually into the Superpedestrian app if you have trouble scanning it.
How do I activate my e-scooter?
E-Scooter without activation will keep beeping and its maximum speed is limited to 10 km/h when it is turned on. The first time you use your scooter, you’ll need to download the Mi Home app and follow the on-screen instructions to activate it. Until the scooter is turned on, the beeping will continue.
Why is my Bird scooter not working?
Ascertain that your Bird is fully charged (at least 80%). Close and reopen the Bird app by pressing the power button. Make sure that your Bluetooth is on and functioning properly. Check your phone’s settings to see if the Bird app has Bluetooth enabled.
How do you reset a Bird scooter?
Remove the antenna. Press the RESET button after connecting the micro USB cord to a power bank or wall charger. The micro USB can be removed once the Brain is receiving power. Tighten all bolts and reattach the antenna if necessary.
Can you unlock multiple Bird scooters?
Using the “Group Ride” button on the service map, multiple Birds can be unlocked from a single account. It is the responsibility of all riders to ensure that they are properly licensed.