Operating a dryer with a bypassed thermal fuse is both unnecessary and unsafe, so a bypass should only be done long enough to troubleshoot a potential problem. Even short usage without a thermal fuse in place could result in irreparable damage to the appliance or injury to yourself.
How do I know if my dryer thermostat is bad?
After removing the cover from the dryer, perform a simple test on each thermostat, using an ohmmeter. Touch one meter lead to one terminal of the thermostat and the other lead to the other terminal. A reading of infinite resistance means that the circuit is broken — in other words, the thermostat is bad.
Can you bypass the high limit thermostat on dryer? Bypassing a Dryer Fuse If you don’t have access to a multimeter or ohmmeter, you can bypass the thermal fuse. Using a dryer with a thermal bypass fuse is both unnecessary and dangerous, so a bypass should only be used for as long as it takes to resolve a potential problem.
Will a dryer run with a bad thermostat?
If the dryer does heat up, a bad dryer thermostat can result in loss of temperature control. If you have a faulty dryer thermostat, the dryer may keep the heat on for too long, causing the dryer to get too hot. If the cycling thermostat is defective, the dryer will not heat up.
What does the thermostat do in a dryer?
A dryer cycling thermostat monitors and controls the temperature inside your dryer while it’s operating. This thermostat has an electrical circuit that is usually closed, allowing electricity to flow through it freely and deliver power to the heating element.
What causes dryer thermostat failure?
A frayed wire can cause a thermostat to keep going bad. A dryer will blow a thermal fuse if it’s close to overheating. Each time the thermal fuse blows it can interfere with a thermostat’s function and cause it to go bad, too.
Can a thermal fuse be bypassed?
The thermal fuse can be bypassed if you don’t have access to a multimeter or ohmmeter. It is both unnecessary and unsafe to operate a dryer with a bypassed thermal fuse.
Where is the thermostat located on a dryer?
The cycling thermostat can be found somewhere in the path of air that is leaving the drum. So, it could be found on the blower wheel housing or inside the venting/exhaust system. Dryer thermostats are usually oval shaped and about an inch and a half in length. Also, there should be two wires leading to each thermostat.
How do I know if my dryer is too hot?
If you pull your clothes out of the dryer and notice that there are burn marks on them, your dryer is running far too hot. If your dryer is hot to the touch, that may be another sign of too much heat. Naturally, the dryer will be a little warm to the touch while it’s running, but it shouldn’t be significantly hot.
Is it worth it to fix a dryer?
Is it worth repairing a dryer? Dryer repairs are worth it if the appliance is less than 4 years old and the cost is less than $400. For older dryers and/or costly repairs, replacing your appliance is more cost effective.
Will a dryer shut off if it gets too hot?
Once a dryer gets too hot, this component reacts to the increased temperature and shuts the appliance off automatically. However, if a cycling thermostat isn’t functioning, it may be why a clothing dryer is overheating and shuts off.
Why is my dryer hot when off?
The top reason a dryer will get hot when it’s not running is that the heating element has become grounded. The heating coils are touching another metal part inside the dryer, causing it to generate heat even when it shouldn’t.