1. Ensure that the power is turned off and unplugged
How do you reset the lubricant on a treadmill Xterra?
Keep pressing the ENTER button after lubricating for three (3) seconds to clear the LUBE error from your display and restart your computer. XTERRA Service can be reached at 800-258-8511 if the ‘LUBE’ error still occurs after you’ve lubricated and reset your machine.
Can I use WD-40 silicone on my treadmill?
Lift the belt strip and apply a light coat of WD-40® High Performance Silicone Lubricant to the underside. After that, re-tighten the belt and run the treadmill at a low speed to ensure that the product is evenly distributed across the surface.
Why does my Xterra treadmill squeak?
Running on a treadmill requires that you keep your feet level. When you walk on an uneven treadmill, it will flex more than it should, which could lead to squeaking from the frame. This unevenness may lead to premature delamination if it persists for a long period of time.
Why does my Xterra treadmill keep stopping?
Using lubrication on treadmills is necessary in order to reduce the amount of friction between the treadmill platform and the belt. The machine automatically shuts down when the friction level reaches a certain level. This could be the reason why the machine suddenly stopped working. Try applying belt lubricant to see if that helps.
What happens if you don’t lubricate your treadmill?
Without regular lubrication, your treadmill runs the risk of breaking down. The belt, deck, and drive motor, for example, could all be worn out. It will be harder on your treadmill’s bearings and motor if you don’t apply lubricant to them.
What type of lubricant is best for treadmills?
Treadmill walking belt lubrication is typically recommended by fitness equipment manufacturers to be done with 100 percent silicone. Spray and liquid forms of silicone are readily available.