Bolt Diameter (in millimetres) (mm)
Size of the head/wrench (mm)
ANSI/ISO DIN
7 – 11
8 13 13
10 16 17
What size hole do I need to make in order to accommodate a m12 bolt?
When using the M12 Bolt, you will need to drill a hole into the substrate with a diameter of 12mm and a clearance hole with a diameter of 14mm in the object that will be put in place.
There were 29 related questions and answers found.
What size bolt has a 12mm head and what is the length of the bolt?
Dimensions of a Metric Shoulder Bolt Diameter of the Shoulders (A) “Thread” is an abbreviation for “threadwork” (C) Allen Wrench Dimensions 8mm x 6mm x 1.0 in. 4mm 10mm 8mm x 1.25mm 4mm 10mm 8mm x 1.25mm 5mm 12mm 10mm x 1.5mm 5mm 12mm 10mm x 1.5mm 5mm 12mm 10mm x 1.5mm 5mm 12mm 10mm x 1.5mm 5mm 12mm 10mm x 1.5mm 5mm 12mm 10mm x 1.5mm 5mm 12mm 10mm x 1.5mm 5mm 12mm 10mm x 1.5mm 5mm 12mm 10mm x 1.5mm 5mm 12mm 10mm x 1.5mm 5mm 12mm 10mm x 1.5mm 5mm 12 6mm 16mm 12mm x 1.75mm 6mm 16mm 12mm x 1.75mm 8mm
What is the size of a bolt with a 15/16 head?
US Size of Bolt Head and Wrench Bolt Diameter (in millimetres) Size of the Head and Wrench Heavy Hex Bolt – Lag Bolt – Square Bolt Hex Bolt – Lag Bolt – Square Bolt 5/8″ 15/16″ 1-1/16″ 3/4″ 1-1/8″ 1-1/4″ 7/8″ 1-5/16″ 1-7/16″ 5/8″ 15/16″ 1-1/16″ 3/4″ 1-1/8″ 1-1/4″
What is the diameter of a m8 bolt?
8mm (8) in diameter is the designation for a bolt or screw that is metric (M) sized and is of the M8 size. This is about the same size as a 5/16 bolt or screw.
What is the inch equivalent of a m8 bolt?
Select the appropriate size. The fundamental major dia (mm) The fundamental major dia (inch) M8 x 1 8mm is the size of the hole. 3150 M10 x 1.5 10mm x 3150 M10 x 1.5 10mm x 3150 M10 x 1.5 10mm x 3150 M10 x 3150 M10 x 3150 M10 x 3150 M10 x 3150 M10 x 3150 M10 x 3150 M10 x 3150 M10 x 3150 M10 x 3150 M10 x 3150 M10 x 3150 M10 x 3150 M10 x 3150 3937 M10 x 1.25 10mm (M10 x 1.25 10mm). 3937 M12 x 1.75 12mm (M12 x 1.75mm). 4724
How do you determine the size of a bolt?
When measuring the diameter of screws and bolts, you must measure the distance between the outer threads on one side and the outer threads on the other side of the screw or bolt. This is referred to as the main diameter, and it is almost always the correct size for the bolt.
What is the best way to determine what size nut to purchase?
It is possible to figure out what the size of the nut is by counting the number of lines on the tape measure. If you count nine lines, the nut is 9 mm (millimetres) in diameter. If the nut is US standard, divide the smallest lines on the tape measure by sixteenths to get the desired length. To get the size, add all of the sixteenths together.
What is the procedure for determining socket sizes?
1/4 inch (0.6 centimetres), 3/8 inch (0.9 centimetres), 1/2 inch (1.3 centimetres), and 3/4 inch (1.6 centimetres) are the most often used socket sizes (1.9 centimeters). In-between sizes are also available, with the smallest being 1/4 inch (0.6 cm) and the largest being every sixteenth of an inch in between (0.16 centimeters).
What is the range of sizes for wrenches?
Wrenches: Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Metric Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Please keep in mind that one wrench may mix two sizes.
Is a 3/8-inch socket the same size as a 10mm socket?
It’s the same height and width. 3/8 refers to an inch, while 10mm is a millimetre.
What is the equivalent of a 10mm socket in terms of size?
MM Size in Inches (about) Inches 8mm 5/16 Inch 0.31496 Inches 9mm Just shy of 3/8 Inch 0.35433 Inches 10mm Just a little over 3/8 Inch 0.39370 Inches 11mm 7/16 Inch 0.43307 Inches Exact Size In Inches
What is the same size as a tenth of a millimetre?
Chart of Metric Socket Dimensions 4/4 inch drive 3/8 inch drive 5/8 inch drive 5mm 7mm 10mm 5.5mm 8mm 11mm 6mm 9mm 12mm 7mm 10mm 13mm 5mm 7mm 10mm 5.5mm 8mm 11mm 6mm 9mm 12mm 7mm 10mm 13mm